Add tally to your ATEM switcher with Blackmagic Design’s GPI and Tally Interface! With 8 contact closure tally outputs, you can send a tally signal to your cameras, replay machines and monitors so everyone knows which camera is ‘on-air’! If you need more tally outputs, simply connect multiple GPI and Tally Interfaces together because it connects via Ethernet to your ATEM production switcher.
25 pin D-type connector
providing 8 opto isolated inputs and 8 relay contact closure outputs.
1 x USB 2.0 high speed i
nterface for configuration and firmware updates.
Optical isolators triggered by
connection to ground.
Max 5V at 14mA.
Mechanical relay contact
closure to ground. Max 30V at 1A.
10/100 BaseT with loop
through for connecting to other ethernet enabled equipment.
Configured via ATEM Switcher Utility.
Internal Software Upgrade
Firmware built into
software driver. Loaded at system startup or via updater software.
12V power supply included with
international socket adaptors for all countries.
0° to 40° C (32° to 104° F)
-20 – 60 degrees celsius
Up to 95%
GPI and Tally Interface