Skip to main content
Til toppen
OM VIDEOUTSTYR | KONTAKT OSS | SERVICE | FACEBOOK
Infosenter
Favoritter
Logg inn

Magewell 64050 AIO Pro Convert HDMI TX NDI Encoder

Varenummer: 505928
Produktnummer: 64050 AIO
EAN: 6936572401195
Magewell
inkl. mva.

Pro Convert HDMI TX Specifications

Input Features

  • Max video input: 2048x1200 60fps 4:4:4/4:2:2

  • Input video at any format by custom EDID of input port

  • Video formats: RGB, YUV BT.601/709/2020

  • 8-channel HDMI-embedded audio

  • HDMI interface: HDMI 1.4, DVI-D

NDI® Encoding Features

  • Encoding Full NDI real-time stream at up to 2048x1200 60fps 4:2:2 8-bit.

  • Output the same resolution as input or any custom resolution. Typical outputs include:

    • 2048x1080p/1920x1080p 23.98/24/25/29.97/30/50/59.94/60

    • 1920x1080i 25/29.97/30/50/59.94/60

    • 1280x720p 23.98/24/25/29.97/30/50/59.94/60/100/119.88/120

    • 720x480p/720x480i 59.94/60/119.88/120

    • 720x576p/720x576i 50/100

  • Output frame rate same as the original, 1/2, 1/3 or 1/4 of input frame rate

  • Encoding 2-channel NDI-embedded audio

  • Support NDI 5.x

Configuration Management

  • Register with Magewell Cloud

  • Remote control via WebUI and Magewell Cloud

  • Provide comprehensive information regarding the device and input signals in real-time

  • Allow to configure how an input is processed and encoded, including deinterlacing, EDID, up/down scaling, frame rate, aspect ratio, as well as the network connection

  • Update firmware

  • Support USB RNDIS/ECM

  • Support IE/Edge/Firefox/Chrome/Safari/Opera web browsers

  • Provide HTTP APIs

On-board Control Buttons

  • 16 Position Rotary DIP Switch: set board-index from 0 to F

PTZ Control

  • Control PTZ cameras using protocols of VISCA, Visca UDP, Visca UDP2rs232, PELCO-P and PELCO-D via NDI

  • Mini-DIN–8 jack (shared with Tally light)

Network Interfaces

  • 10/100/1000Mbps Ethernet

  • IEEE 802.3af PoE

USB Interface

  • USB2.0 Type B

    • 5V/2.1A power supply

    • USB RNDIS/ECM

Supported Products

  • NDI Studio Monitor

  • OBS

  • vMix

  • Any other NDI-enabled product

LED Indicators

  • Status LEDs indicate:

    • Power supply: on/off

    • Input signal: locked/unlocked

Form Factor

  • 100.9smm (L) x 60.2mm (W) x 23.3mm (H)

Accessories

  • USB 2.0 A to B cable

  • 5V/2.1A power adaptor

  • Mini-DIN 8 breakout cable

  • Tally light

  • L-bracket

Screw Mounting Hole

  • ¼–20 threaded hole

Power Consumption

  • 5V max current: ~1.5A

  • Max power consumption: ~6W

Working Environment

  • Operating temperature: 0 to 40 deg C

  • Storage temperature: –20 to 70 deg C

  • Relative humidity: 5% to 90% non-condensing

Lenker
Min side