Beskrivelse
Gjør enkel capture av HDMI video med Magewell USB Capture HDMI dongle.
God støtte for ulike formater opptil 1920x1200p60.
-HDMI inngang og HDMI Loop-through utgang
-Støtter HDMI Embedded Audio
-Audioinngang (3,5mm minijack, mic. level) for alternativ lyd inn
-Audiooutgang (3,5mm minijack, headphone level) for lytting til HDMI embedded audio
-Støtter opp til 4Kp60 4:2:0 input. Hent inn video fra de nyeste spillkonsollene som PS4 Pro og XBOX One S. Automatisk nedskalering til 2K for opptak og streaming.
-Hardware Scaling og De-Interlacing
-Kan gjøre Frame-Rate konvertering
-Plug-and-Play ved hjelp av eksisternede drivere
-Bakoverkompatibel med USB 2.0
-Onboard RAM for Stream Buffering
Supported OS
Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64)
Linux (Ubuntu 12.04 – 16.10, CentOS 7)
OS X 10.9 – 0.11
macOS 10.12
Chrome OS
Supported APIs
Windows:
¤DirectShow
¤Wave API/DirectSound/WASAPI
Linux:
¤V4L2
¤ALSA
OS X/macOS:
¤QuickTime
¤AV Foundation
Supported Software
VLC
VirtualDub
OBS
XSplit
vMix
VidBlaster
Wirecast
Microsoft Media Encoder
Adobe Flash Media Encoder
Any other DirectShow, V4L2, QuickTime,AV Foundation based encoding or streaming software
Input Interfaces
HDMI
¤DVI-D 1.0
¤HDMI 1.4
3.5mm audio jack
¤Microphone interface
Host Interfaces: USB 3.0
¤compatible with USB 2.0
¤compatible with USB 3.1 Gen 1
Output Interface
¤ 3.5mm audio jack, Headphones interface
Loop-through Interface
¤HDMI loop-through interface
Input Features
¤Support for input video resolutions up to 4096×2160
HDMI Specific Features
297MHz HDMIreceiver
Adaptive HDMI equalizer support for cables lengths up to 30M
Support for customized EDID
Support for extraction ofAVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
Full colorimetry support
Support for up to 4096×2160 4:4:4/4:2:2 30fps or 4096×2160 4:2:0 60fps input signals
For 4:2:0 input signals, the horizontal and vertical resolution will be reduced to 1/2 for capturing
For 4:4:4/4:2:2 input signal at more than 170MHz, the horizontal resolution will be reduced to 1/2 for capturing
Support for 2 channel ISC60958 audio streams
Support for extraction of audio formation information & channel status data
Support for extraction of video timing information
Support for extraction of 3D format information
Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.
Analog Audio Features
Extraction of stereo embedded HDMI audio for recording and output via 3.5mm stereo mini-jack Line Out
Capture of analog audio via 3.5 mm microphone interface
Integrate the functions of a USB audio card. Playback audio via 3.5 mm headphones interface. Support for recording the playback audio of the computer.
Video Capture format
Support for capture resolutions up to 2048×2160
Support for capture frame rates up to 120fps (Actual capture frame rate can be limited by the USB bandwidth and internal working frequency. Typical capture frame rates on the Intel USB 3.0 controller are as follows.)
¤1920×1080 YUY2 (up to 70fps)
¤1920×1080 RGB24 (up to 60fps)
Support for YUY2 & UYVY4:2:2 8-bit
Support for RGB24 & RGB32 4:4:4 8-bit
The default capture format is YUY2. More capture format can be set using USB Capture Utility.
Video Processing Features
Video processing pipelines with 160 Mpixels/s processing bandwidth
Video cropping
Video scaling
Video de-interlacing
¤Weave
¤Blend top & bottom field
¤Top field only
¤Bottom field only
Video aspect ratio conversion
¤Auto or manual selection of input aspect ratio
¤Auto or manual selection of capture aspect ratio
¤Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
Video color format conversion
¤Auto or manual selection of input color format & quantization range
¤Auto or manual selection of capture color format, quantization range & saturation range
¤Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
¤Support for Limited or Full quantization range
¤Support for Limited, Full & ‘Extended gamut’ saturation range
Video frame rate conversion
Vertical flip and mirror
Multiple devices on one computer
Support for connecting multiple USB devices to one system
Support for setting the device serial number as the device name shown in the system using USB Capture Utility
SDK
The USB Capture SDK provide functions including signal status extraction, capture configuration, etc.
Firmware Upgrade
Multiple devices in one system can be upgraded simultaneously
LED Indicator
Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed.
Form Factor
98.1mm (L) x 56.8mm (W) x 17mm (H)
Power Consumption
5V max current: 900mA
max power consumption:~4,5W
Working Environment
Operating temperature: 0 to 50 deg C
Storage temperature: -20 to 70 deg C
Relative Humidity: 5% to 90% non-condensing
Dette inngår i leveransen:
1 stk USB Capture SDI Dongle
1 stk USB3.0 kabel
1 stk Installation Guide
Garantibevis 2 år mot fabrikasjonsfeil, og garantibetingelser