Compact 98Wh Pocket sized V-mount Battery Pack
◆ Tiny V-mount battery, Pocket fit
◆ 98Wh/6.8Ah fly-friendly capacity
◆ Max 100W/8A constant load
◆ 1x D-tap output & charging input
◆ 1x USB 5V/2A output
◆ 5-step LED power indicator
◆ Power info for both SONY & RED
◆ Wire-Free internal technic
◆ Multiple circuit protections
Tiny V-mount battery
Pocket fit size
The brick size V-mount batteries are always too big and heavy for field shootings, especially the handheld stabilizers, focus puller monitor, portable LED panel, or small cameras.
PB-M98S Pocket V-mount battery is designed for the above applications!
It’s only a DV battery size, with high capacity cells and still reaches 98Wh, and without any compromise on the DC sockets!
98Wh Fly Friendly
Max 100W/8A constant load
PB-M98S consists of 8pcs of high class 18650 battery cells, nominal voltage is 14.4V and reaches 98Wh / 6.6Ah high capacity. You can take this battery in carry-on luggage to board airplane.
The Max constant load is 100W, 8A.
Built-in D-tap and USB
The pocket size PB-M98S still has D-tap and USB sockets built-in.
The D-tap socket share 100W/8A load DC output with the V-mount pins, and support charging input by SWIT PC-U130B2 dual D-tap charger.
The USB socket outputs 5V/2A for smart phone fast charging.
5-LED Power Indicator
Low battery warning
PB-M98S has 5-LEDs to indicator remaining power percentage. When remaining power is less than 10%, the last LED will flash automatically to remind changing battery.
PB-M98S can be charged by all standard V-mount chargers and D-tap chargers. The max charging current is 3A.
The following chargers are recommended:
1. S-3822S, Portable 2-ch Simultaneous Charger
Charge 2x PB-M98S: Approx. 3 hours
2. PC-U130B2, Ultra-Portable Dual D-tap head charger
Charge 1x PB-M98S: Approx. 3 hours
Charge 2x PB-M98S: Approx. 5 hours and 15 minutes
PB-M98S can communicate with both SONY and RED cameras and display digital power info on camera viewfinder.
Wire-Free Internal Tech
PB-M98S has innovative “Wire-Free” internal technic. All the cells, D-tap, USB, power indicator devices are directly soldered onto PCB, no connecting wires, to reduce internal resistance effectively, and make the circuit stable, safe, and reliable.