Beskrivelse
PB-S98S
98Wh Multi-sockets Square Digital Battery Pack
◆Square shape design for Cine-cameras
◆Max 100W, 8A load
◆2× D-tap output sockets (Max 100W/8A in total)
◆1× USB 5V/2A power output sockets
◆LCD display accurate remaining run time
◆Display power info in both SONY & RED
◆Multiple circuit protections
PB-S series camera batteries are compact designed, shorter than normal V/Gold mount batteries, and match perfectly with most of the Cine-cameras.


98Wh / 6.8Ah Capacity
Consists of 12pcs of high class 18650 battery cells, nominal voltage is 14.4V and reaches 98Wh / 6.6Ah high capacity.
Can run approx 3 hours for normal ENG cameras.
2× D-tap output sockets, 1× USB 5V/2A power output socket
PB-S98S is equipped with 2 D-tap DC output sockets, which can power other on-camera equipments together. The Max output current of D-tap is 8A, 100W.
PB-S98S is equipped with 1x USB 5V/2A output, which can be used to charge mobile phones, tablets and other portable devices.

LCD display accurate remaining run time
The build-in LCD can displays remaining power percentage, remaining working time, low power warning, and battery cycle times, and support viewfinder info display on both SONY and RED cameras.

①P01~P13: The battery trigger protection function and it can be recovered;
② When the battery rests over 10 days or runs out of power,it will enter sleep mode and the LCD will not display.
③ E01~E03: Not recoverable error, please contact manufacturers to repair, do not disassemble the battery.
Common battery protection code:
P01
|
Run out of power, please charge the battery asap. |
P02
|
Over-voltage when charging, please remove the battery, discharge the battery to decrease the battery voltage to restore. |
P03
|
Over-current when charging, please remove the battery, and it will restore after 30 seconds’ standing. |
P05~P07
|
The load is too heavy, please remove the battery, and it will restore after 30 seconds’ standing. |
P08~P09
|
Battery short circuit, please make sure that there is no foreign body between the electrodes or remove the battery, and it will restore after 30 seconds’ standing. |
P10~P13
|
Temperature protection, please remove the battery and place at room temperature to recover |
